Person：Manager Wu
Hotline：+8613503052379（Mr. Wu）
Phone：+8613503052379（Mr. Wu）
Address：9th Floor, Building 5, Shifeng Zhizaoyuan, No. 6 Lixin 8th Road, Xiancun Town, Zengcheng District, Guangzhou City
put aside plate rack is a common storage shelves, are normally used for storing goods and scattered light. However, for the storage of some heavy goods, such as more than 1 ton of goods, can shelf shelves be stored?
In fact, the load bearing of shelf shelves can be achieved 1 ton. In general, the load bearing of shelf shelves is determined according to its material and structure. Under normal circumstances, the load bearing of shelf shelves mainly depends on the material and specifications of its beams and columns. The common beam materials are steel, aluminum alloy, etc., while the column is usually made of Angle steel or cold-rolled steel plate. These materials have a strong load bearing capacity, so the load bearing of the shelf can reach 1 ton.
Of course, to ensure that the shelf shelf can withstand more than 1 ton of weight, but also need to pay attention to the installation and use of the shelf. First of all, the installation of the shelf must meet the specifications, the connection of the beam and the column must be firm, without any loosening and deformation. Secondly, in the process of use, overload and improper use should be avoided, such as uneven stacking of goods or beyond the shelf bearing range. Only in strict compliance with the specifications of the use of shelves and pay attention to the uniform distribution of goods, shelf shelves can ensure the safe storage of more than 1 ton of goods.
However, shelf manufacturers rarely do shelf shelves 1 ton/layer of bearing capacity, to do so large bearing customers are very few. Because the shelf shelf is mainly manual access, manual can not move too heavy goods, so are used to store light goods, so it is not necessary to do 1 ton of bearing, 500kg is enough, the bearing is too high but a waste of money.
